Skip to main content
Skip table of contents

Update firmware

To upgrade the MRU, follow these steps:

  • Download the latest firmware on your PC here

  • Open the MRU configurator and connect to your MRU

  • Click “Upgrade“ in the bottom section of the main dashboard

upgrade_fw_labeled.png

  • Then, click “Select file“, choose the downloaded firmware from your PC and start the firmware upgrade. Do not power off the MRU during the firmware updates. At the end of the update, the MRU will restart.

select_file_fw_labeled.png

Ethernet only

Firmware updates are currently only supported via Ethernet.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close