Network
Configuration of network and communication protocols supported via the Ethernet port, including UDP, Modbus TCP, and EtherNet/IP.
Network configuration
GET/SET NETWORK | |||||
|---|---|---|---|---|---|
SETTING GROUP | DESCRIPTION | DEFAULT | DATA TYPE | VALID RANGE | NOTE |
ipaddrmode | IP address mode determines how a device obtains its IP address | static | ENUM | static, dhcplinklocal, linklocal, dhcp | static: Fixed IP address. dhcplinklocal: Try DHCP first, fallback to link-local if DHCP fails. linklocal: Assigns a local IP without DHCP. dhcp: Automatically gets IP settings from a DHCP server. |
ip | ip address of MRU | 10.0.0.50 | - | [0.0.0.0 - 255.255.255.255] | |
subnetmask | subnet mask | 255.255.0.0 | - | [0.0.0.0 - 255.255.255.255] | |
gateway | gateway | 0.0.0.0 | - | [0.0.0.0 - 255.255.255.255] | |
dns | DNS server | 0.0.0.0 | - | [0.0.0.0 - 255.255.255.255] | |
linkspeed | link speed | 100full | ENUM | autonegotiate, 10half, 10full, 100half, 100full | autonegotiate: Automatically selects link speed and duplex mode. 10half: 10 Mbps half duplex. 10full: 10 Mbps full duplex. 100half: 100 Mbps half duplex. 100full: 100 Mbps full duplex. |
Example:
Examples of 'get' and corresponding 'set' commands within the network domain are provided below.
GET | SET |
get,network,ipaddrmode<CR><LF> | set,network,ipaddrmode,static<CR><LF> |
get,network,ip | set,network,ip,10.0.0.50<CR><LF> |
get,network,subnetmask<CR><LF> | set,network,subnetmask,255.255.0.0<CR><LF> |
get,network,gateway<CR><LF> | set,network,gateway,0.0.0.0<CR><LF> |
get,network,dns<CR><LF> | set,network,dns,0.0.0.0<CR><LF> |
get,network,linkspeed<CR><LF> | set,network,linkspeed,100full<CR><LF> |
TCP configuration
GET/SET TCP | |||||
|---|---|---|---|---|---|
SETTING | DESCRIPTION | DEFAULT | DATA TYPE | VALID RANGE | NOTE |
port | TCP port | 8090 | U16 | [0, 65535] | Verify the availability of a port before set-up. |
Example:
An example of a 'get' and corresponding 'set' command within the tcp domain is provided below.
GET | SET |
get,tcp,port<CR><LF> | set,tcp,port,8090<CR><LF> |
UDP configuration
GET/SET UDP | |||||
|---|---|---|---|---|---|
SETTING | DESCRIPTION | DEFAULT | DATA TYPE | VALID RANGE | NOTE |
hostip | ip address of host computer | 10.0.0.100 | - | [0.0.0.0-255.255.255.255] | |
port | remote UDP port | 2001 | U16 | [0, 65535] | Verify the availability of a port before set-up. |
Example:
Examples of 'get' and corresponding 'set' commands within the udp domain are provided below.
GET | SET |
get,udp,hostip<CR><LF> | set,udp,hostip,10.0.0.100<CR><LF> |
get,udp,port<CR><LF> | set,udp,port,2001<CR><LF> |
Modbus TCP configuration
GET/SET MODBUSTCP | |||||
|---|---|---|---|---|---|
SETTING | DESCRIPTION | DATA TYPE | DEFAULT | VALID RANGE | NOTE |
registertype | register type for Modbus TCP | ENUM | input | input, holding | See Modbus register addressing in MODBUS TCP for details. |
Example:
An example of a 'get' and corresponding 'set' command within the Modbus TCP domain is provided below.
GET | SET |
get,modbustcp,registertype<CR><LF> | set,modbustcp,registertype,input<CR><LF> |
Ethernet/IP configuration
GET/SET ETHERNETIP | ||||
|---|---|---|---|---|
SETTING | DESCRIPTION | DEFAULT | DATA TYPE | VALID RANGE |
instanceid | device identifier | 110 | U8 | [102, 199] |
Example:
An example of a 'get' and corresponding 'set' command within the ethernetip domain is provided below.
GET | SET |
get,ethernetip,instanceid<CR><LF | set,ethernetip,instanceid,110<CR><LF> |